Browse: Home /
gas turbine
gas turbine
You are browsing the gas turbine tag archive.
SINGLE-SHAFT COMBINED-CYCLE POWER GENERATION SYSTEM
L.O. Tomlinson and S. McCullough GE Power Systems Schenectady, NY
ABSTRACT
Combined-cycle power plants have demonstrated high thermal efficiency, high reliability/availability and economic power generation for application in base load and cyclic duty utility service. The single-shaft combined-cycle power generation system; in which the gas turbine, steam turbine and generator (STAG™) are installed in [...]
Posted in CCGT power plant
| Tagged Combinedcycle power plants, gas turbine, Power generation, power generation equipment, single shaft combined cycle power plant, steam turbine
|
Detailed Hot Section Mapping of Siemens SGT-600Jenny Sundberg & Mats, Blomstedt, Siemens Industrial, Turbomachinery AB, SE-612 83 Finspong, Sweden
ABSTRACT
The 25-MW Siemens gas turbine SGT-600 (previously known as GT10B) is a mature product, which recently passed five million operating hours. The first engines were introduced in the mid-eighties, and currently over 230 SGT-600 have been [...]
Posted in gas turbines
| Tagged gas turbine, SGT-600, Siemens, Siemens SGT-600 gas turbine
|
Emissions Driving ICL Technology
Driven by electricity rather than gas ICL technology saves energy and avoids associated CO2 emissions. Using a typical 8 MW ICL rather than a comparably sized gas turbine-driven compressor can reduce CO2 emissions by 60% or more.
Introduced in 2007, integrated compressor line (ICL) technology from GE Oil & Gas is an integrated system [...]
Posted in Emission Technologies
| Tagged CO2 emissions, Emissions Driving ICL Technology, gas turbine, gas turbine-driven compressor, ICL technology, integrated compressor line
|
Fast Cycling Capability for New Plants and Upgrade Opportunities
H. Emberger, E. Schmid, E. Gobrecht, Siemens Power Generation (PG), Germany (Source: Siemens Energy)
1 Introduction
Increasing demand for electricity, replacement of ageing plants and ongoing liberalization characterize the Asian power market. The customer focus is the optimization of life-cycle-cost (LCC) driven by features like
High efficiency, high power output [...]
Posted in CCGT power plant
| Tagged combined-cycle plants, Fast Cycling Capability, gas turbine, New Plants, power plant, Upgrade Plants
|
Swiss-Made Gas Turbine Fuel Skids
Soruce: WWW.DIESELGASTURBINE.COM
Since its establishment in 1995, the Swiss company Enerproject, has been specializing in the design and manufacture of gas turbine fuel skids. To date, the company has delivered more than 200 skids to fuel aeroderivative and heavy-duty gas turbines made by companies such as GE, Kawasaki, Siemens and Solar. These [...]
Posted in gas turbines
| Tagged gas turbine, Gas Turbine Fuel Skids, manufacture of gas turbine
|
Fuel Flexibility Opens Up New Markets For Siemens’ SGT-800
Siemens Energy´s SGT-800 industrial gas turbine can now be operated on a wider range of fuels. According to the company, the Dry Low Emissions (DLE) combustion system of the SGT-800 can achieve very low NOx and CO emissions in dual fuel applications without having to resort [...]
Posted in gas turbines
| Tagged gas turbine, gas turbine fuels, SGT-800 industrial gas turbine, Siemens Energy
|
High Operational Flexibility and Low Emissions
A power plant’s operational flexibility is a crucial factor for its commercial success in a dynamic market environment. There is a much higher demand for flexibility regarding fuel composition, and plants are expected to manage operations between the two extremes of daily start and stop and base-load operation. Alstom tapped into [...]
Posted in emmission control in power plants
| Tagged Alstom GT24, combined-cycle power plant, emissions and pulsation, gas turbine, GT26, High Operational Flexibility and Low Emissions, power output levels, power plant emissions, single-combustion gas turbine
|
GE Oil & Gas Develops New Gas Turbine Generators
GE Oil & Gas, a provider of advanced oil and gas technology equipment and services, announced that it has designed gas turbine generators that can operate in extreme temperatures up to -60ºC for a power plant project at the Vankor oil field (Turukhansky district, Krasnoyarsk region) owned by [...]
Posted in gas turbines
| Tagged advanced oil and gas technology, gas turbine, gas turbine generators, ge, ge gas turibines, GE Oil & Gas, oil and gas, oil and gas equipment and services, power plant, power plant project
|
GE Oil & Gas Launches LM6000 Enhanced Package
GE Oil & Gas has introduced its LM6000 Enhanced Package, a new offering for offshore and onshore applications which builds on more than 16 million hours of experience compiled by GE’s LM6000 aeroderivative gas turbine fleet. The new LM6000 package can produce more than 40 megawatts, which fills a [...]
Posted in gas turbines
| Tagged aeroderivative gas turbine solutions portfolio, gas turbine, ge, LM6000 Enhanced Package, offshore and onshore applications
|
Siemens Energy has been awarded a contract from Northern California Power Agency (NCPA) for the supply of a Flex-Plant 30 power island. The 280-MW, natural gas-fired combined cycle power plant will be located in Lodi, California, U.S.A. and will generate highly efficient and environmentally friendly power. The Flex-Plant 30 concept is unique because of its [...]
Posted in News
| Tagged carbon monoxide control, gas turbine, Heat Recovery Steam Generator, natural gas-fired combined cycle power plant, new power plant, power island, power plant, Siemens Energy
|
Electric Power News From CAT